EspressoFit

IMS B62.5 Competition baskets

B62.5 is IMS’s line for 54mm group heads — the Breville and Sage machines. Note the tamper figure below: IMS specifies Ø53mm, not the 54mm the format is usually named after. The 54mm is the body diameter, and confusing the two is how people end up with a tamper that rattles.

The three diameters

Every basket in this series shares them. They are quoted from the manufacturer pages cited on the individual entries below, not hand-entered here.

MeasurementFigureWhat it decides
Border Ø62.5 mmWhether the basket seats in the portafilter
Body Ø54 mmWhether it drops in at all
Tamper Ø53 mmWhich tamper you need

If those three numbers being different is a surprise, that is the single most useful thing to understand about basket fitment — see why “58mm” isn’t one standard.

Every basket in the series (9)

Single (1 cup)

CodeHeightConfidence
B62.51TH23E23mmverified

Competition (2 cup)

CodeHeightConfidence
B62.52TH22E22mmverified
B62.52TH24E24mmverified
B62.52TH26E26mmverified
B62.52TH28E28mmverified

NanoQuartz (NT)

CodeHeightConfidence
B62.52TH22NT22mmverified
B62.52TH24NT24mmverified
B62.52TH26NT26mmverified
B62.52TH28NT28mmverified

Dose figures vary by roast level and are published per basket rather than per series, so they live on the individual entries — each one quotes the manufacturer’s own capacity table with the date it was read.

Machines this series fits (9)

Cross-references follow the manufacturer’s own compatibility list rather than size logic, so a machine of the right diameter is not listed unless the source names it. Sizes covered: 54mm.

Wondering what the code itself means — the digits, the letters, the suffix? See IMS basket codes, decoded.